Hybrid stock
Something I’ve been fiddling with for a while. Building a rifle stock solely out of carbon is very difficult, and requires at least a 3 part mold, and typically an inflatable bag system. This design...
View ArticleCNC process
Did a bit more exploration of how the wood part of this will work. Pretty confident with this, now to learn more about the carbon fibre.
View ArticleFirst prototype
Pretty much ready to chuck this on the mill now as a test in pine plywood. I’ll be able to validate a bunch of stuff and see what kind of ballpark I’m in for strength capability. My...
View Articlebranding test
Bit of experimentation with branding (not really my forte) while I nut out the finer details of the CNC process.
View ArticleMilling process
Now for the waiting game to build the first prototype and see if this actually works
View ArticleBack to it
After a lot of mucking around, stalling, being stalled, things are looking positive to get prototypes 1 & 2 built out of Wellington. I’m not doing any further development on the stock until I get...
View ArticleP1 machining
Machining of the P1 prototype is underway! Superthanks to Rob from High Tech Carving for the WIP photos.
View ArticleP1 Prototype
Rob at HTC did an AMAZING job! Now to do a bunch of sanding, a bit of dremel-ing, check fitting, seal the inside, stick it together, sand the outside, bed the action, seal the outside….
View ArticleP1 prototype complete
It fits! P1 prototype build is complete. Now for the fun bits; Finishing up the blind magazine so that it’ll feed correctly Final weigh in Stress testing (aka, will it explode?)
View ArticleP2 vs P1
Progress is slowly creeping onwards – I’ve laminated the red beech blank together, ready to ship, and the CAD for the P2 prototype is just about finished. Here’s a brief summary of the improvements...
View ArticleSurfacing progress
I’m definitely improving with Rhino – there’s still a lot of surface optimization to go into the grip area, but I’ll wait for until I’ve printed and validated the current geometry before I refine it...
View ArticleParametric Progress
I got the surfacing in Rhino to a place that I’m pretty happy with. I’ve now taken that base surface into Fusion 360 where I’ve nearly completed a fully parametric model – I can adjust the grip,...
View ArticleExploded stock
Documenting some of the things that I’ve been working on in the background for the last year or so
View Article
More Pages to Explore .....